Clematis armandii

Clematis armandii

Forget the big-flowered clematis on a mailbox post - this is the evergreen one. Long, glossy, leathery leaves cover a fence or arbor all year, and in late winter to early spring the vine smothers itself in clusters of small white flowers with a sweet vanilla-almond fragrance you can smell from the driveway. It is happiest in mild-winter zones 7-9 and needs space and a sturdy support.

Evergreen Vanilla-almond fragrance Blooms late winter to spring Vigorous USDA zones 7-9 Toxic to pets if eaten
At a glance

Clematis armandii quick facts

Height15-25 ft
Spread6-10 ft
Plant typeEvergreen twining vine
Flower colorWhite, sometimes blushed pink
Bloom timeFebruary-April, depending on zone
HardinessUSDA zones 7-9
SunlightFull sun to part shade, roots shaded
Soil typeFertile loam; tolerates alkaline
MoistureEvenly moist
DrainageWell-drained
Growth rateFast once established
FoliageLong, leathery, glossy dark green
DeerUsually avoided; not deer-proof
MaintenanceLow - prune right after flowering
Get to know it

About Clematis armandii

Armand clematis, as it is sometimes called, comes from central and southern China and is the most widely planted evergreen clematis in American gardens. You will see it draped over fences in Seattle and Portland, climbing arbors in the Bay Area and scrambling up porch posts across the upper South. Its leaves set it apart: long, narrow and leathery, held in threes and hanging in a way that gives the whole vine a draped, almost tropical look.

It flowers early - as soon as February in zone 9 and by April in zone 7 - with loose clusters of small, four-petaled white flowers. The fragrance is the reason people plant it: warm, sweet vanilla-almond that drifts across a patio on a still day. ‘Apple Blossom’ has pink-tinged flowers and bronze young leaves; ‘Snowdrift’ is pure white.

It blooms on the previous year’s growth (pruning Group 1), so the only pruning is a trim right after flowering. Cut it any later and you lose next spring’s show.

It is not considered invasive in the US. Don’t confuse it with sweet autumn clematis (C. terniflora), a fall-blooming Asian species that has become invasive in much of the East. For a native evergreen vine with early fragrant flowers in the Southeast, consider Carolina jessamine or crossvine.

Cluster of white clematis flowers among green leaves in a garden
Right plant, right place

Ideal growing conditions

A sheltered spot with sun on the leaves, shade on the roots and plenty of room to climb. Cold, drying winter wind is its enemy.

Sunlight

Full sun to part shade. In the Northwest give it full sun; in the South and inland California, afternoon shade keeps the leaves from scorching.

Soil

Fertile, well-drained soil with plenty of compost. Neutral to slightly alkaline is ideal, and it copes with most garden soils.

Moisture

Keep it evenly moist, especially for the first two summers. A thick mulch or low plants over the roots keep them cool.

Drainage

Well-drained. It dislikes sitting wet, especially in heavy clay over a rainy winter.

Hardiness

USDA zones 7-9. Leaves are damaged below roughly 10°F, and stems can be killed in zone 7 cold snaps; established plants usually regrow.

Shelter

Essential at the cold end of its range. Winter wind browns and tatters the evergreen leaves, the most common complaint.

Give it room

15-25 ft is normal. Plan for a long fence run, a large arbor or pergola, or a sturdy wire grid on a wall - not a small trellis panel.

Where it works

South- or west-facing fences and walls, sheltered courtyards, large pergolas and beside an entry where the fragrance greets you.

Region by region

Growing Clematis armandii across the US

An evergreen vine for USDA zones 7-9, at its best on the West Coast and in the upper South.

Pacific Northwest

A favorite west of the Cascades, where it blooms in March and stays green all year. Plant in well-drained soil for the wet winters, and site it out of the east winds that can scorch leaves during cold snaps.

Southwest & California

Thrives in coastal and Northern California with regular water. In hot inland valleys and the desert, give it afternoon shade, deep mulch and drip irrigation.

Southeast & Gulf Coast

Grows well in zones 7-9 with afternoon shade and steady moisture. Native Carolina jessamine and crossvine give a similar early-spring, evergreen effect with more value for local wildlife.

Northeast & Midwest

Only for sheltered zone 7 gardens, such as coastal areas of the mid-Atlantic. Elsewhere, grow hardy clematis such as the spring-flowering alpine types or native virgin’s bower instead.

Mountain West & Plains

Too cold and windy in winter. Choose a deciduous, cold-hardy clematis for fences and trellises in this region.

Find your growing zone by ZIP code

Step by step

How to plant Clematis armandii

Plant in spring or early fall

In zone 7, plant in spring after your last frost (early to mid-April) so it roots before winter. In zones 8-9, early fall also works.

Pick a sheltered, sunny spot

Warmth and protection from cold winter wind matter more than anything else for this vine.

Install a strong support first

A mature vine is heavy. Run galvanized wire through screw eyes about 16 in apart, or use a sturdy arbor or welded-wire panel.

Plant 2 in deep, 18 in from the wall

Set the crown slightly below the soil surface and keep it out of the dry strip at the base of the house or fence.

Enrich, water and mulch

Work in compost, soak well and mulch 2-3 in deep to keep the roots cool and moist.

Year-round care

Looking after Clematis armandii

Prune right after flowering and never later. Otherwise, water, fertilize and guide the stems.

Pruning

As soon as flowering ends in spring, thin and shorten stems to keep it in bounds. Later cuts remove next year’s flower buds.

Training

Guide new growth across the support through summer. Left alone it climbs straight to the top and hangs in a heavy curtain that can pull the support down.

Watering

Water deeply through the first two summers and in dry spells after that - essential in summer-dry California.

Fertilizing

A balanced fertilizer in early spring and a compost mulch. It is a vigorous plant and responds well.

Tidying the leaves

Older leaves brown and drop naturally, and winter-scorched ones look ragged. Pull out the worst by hand after flowering rather than shearing.

After a hard winter

Don’t cut damaged growth until late spring, when you can see where the new shoots are breaking.

Troubleshooting

Common problems & how to prevent them

Brown, ragged leaves

Leaf tips and edges browned, especially after winter or a heat wave.

Prevent: cold, drying winter wind, summer sun scorch, or normal leaf drop. Give it shelter and afternoon shade in hot areas, and pull the worst leaves after flowering.

No flowers

Plenty of evergreen growth but nothing in spring.

Prevent: pruned at the wrong time. It blooms on last year’s wood, so any cut after early summer removes the next spring’s flowers.

All growth at the top

Bare woody stems below and a mass of leaves and flowers above.

Prevent: its natural habit, made worse by not training. Fan stems sideways from the start, and thin rather than shorten when you prune.

Freeze damage

Stems killed back after an arctic blast.

Prevent: expected at the edge of zone 7. Wait until late spring, cut back to live growth, and it should regrow. In zone 6 and colder it isn’t reliable.

Pulling off the support

The whole vine sags or peels away from the fence or wall.

Prevent: a mature plant is genuinely heavy, especially when wet. Use strong wire and screw eyes or a solid arbor, and check the fixings every spring.
For nature

Wildlife value

Very early nectar for bees, and evergreen cover for birds the rest of the year.

Very early nectar

Flowering in late winter and early spring, it feeds honeybees, early bumblebee queens and other native bees when little else is open.

Nesting and roosting

Dense evergreen growth on a fence gives songbirds such as house finches, Carolina wrens and American robins shelter and nest sites.

Fragrance with a purpose

The strong scent draws pollinators from a distance on a mild spring day.

Deer

Clematis contain an irritant compound, so deer usually leave established vines alone, though they may nibble new shoots.

Not a native

It supports fewer native insects than local vines. Add native crossvine, Carolina jessamine or coral honeysuckle elsewhere in the yard if wildlife is a priority.

You asked

Clematis armandii - frequently asked questions

What zone does Clematis armandii grow in?

USDA zones 7 to 9. It may be damaged in severe zone 7 winters and is not reliable in zone 6 or colder.

Is Clematis armandii really evergreen?

Yes. It keeps its long, leathery leaves all year, which is unusual for a clematis and one of the main reasons to grow it.

Is evergreen clematis invasive?

Clematis armandii is not considered invasive in the US. The clematis to avoid is sweet autumn clematis (C. terniflora), which spreads by seed into woodlands and is listed as invasive in many eastern states.

Is it deer resistant?

Fairly. Clematis are mildly toxic and deer usually avoid them, but hungry deer may browse young growth. Protect new plants where deer pressure is high.

When should I prune it?

Right after it finishes flowering in spring. It is a Group 1 clematis and blooms on last year’s wood, so pruning later in the year removes the next spring’s flowers.

Why are the leaves brown and ragged?

Usually cold, drying winter wind or hot afternoon sun, plus normal shedding of old leaves. More shelter and some afternoon shade help; pull the worst leaves by hand after flowering.

How big does it get?

Typically 15 to 25 feet tall with a 6 to 10 foot spread. It needs a long fence, a large arbor or a sturdy wire system on a wall.

Can I cut it back hard?

It usually regrows from old wood, but a hard cut costs a year of flowers and recovery can be slow. Thin and reduce after flowering instead.

Will it grow in shade?

In part shade, yes, and afternoon shade is helpful in hot climates. In deep shade it flowers poorly.

Can I grow it in a container?

Only short term. It is too vigorous and thirsty for most pots; if you try, use a container of 20 gallons or more with a sturdy trellis.

Is it toxic to pets?

Yes, mildly. Clematis contain an irritant that can cause drooling, mouth irritation, vomiting or diarrhea in cats and dogs if eaten, and the sap can irritate skin. Call your veterinarian if a pet eats any.

Shop the look

Recommended products

Hand-picked Clematis armandii growing essentials, chosen on merit.

Product links go to search results on Amazon.com so you can compare options and prices. PlantMapper USA does not currently earn anything from these links. See our Affiliate Disclosure.

Find your next plant with PlantMapper

Looking for a fragrant vine that suits your zone? Tell our free Plant Finder which way your fence faces, how sheltered it is and how much space you have, and it will suggest plants that thrive.