A simple plant matcher for American yards. Pick your USDA zone, then tell us about your spot -
sun, soil, moisture - and we’ll show plants that will thrive there.
Open the free PlantMapper app to match plants, lay out a garden bed, compare plants side by side and save your favorites - all in one place, right in your browser.
Leave anything as Any if you're not sure - results refresh as you go.
Plant matches
No plants match every filter. Try setting one or two filters back to Any.
Light
Soil
Moisture
Flowering
Maintenance
Root behavior
Safe distance
Bee value
Where should I start
Four ways into the plant database
The Plant Finder holds 506 garden plants, each tagged with a USDA hardiness zone range, deer resistance, North American native status and US invasive warnings, plus the things that decide whether a plant thrives in your yard: sun, soil, moisture and how big it ends up.
Counted from the plant database and the filter controls on this page. We make no accuracy or popularity claims for the data - see the questions below.
506
plants in the database
Trees, shrubs, perennials, vines, grasses, ferns and bulbs, each with a USDA zone range.
14
filters you can combine
Zone, sun, soil, moisture, height, spread, care, type, foliage, color, season, style, spot, plus deer-resistant, native and hide-invasive options.
9
USDA zones to choose from
Zones 3 to 11, from Minnesota winters to South Florida - find your zone.
Free to use
No sign-up
USDA zone data
Filters combine
Mobile friendly
Why it matters
Right plant, right place - and everything else follows
A plant in conditions it likes needs a fraction of the attention
Light is the first filter, not the last
A shade-lover in full sun scorches and a sun-lover in shade grows drawn and flops. Almost every “difficult” plant is a plant in the wrong light - or the wrong zone. Set your USDA zone and your sun first, and the list shortens fast.
Soil and moisture rule out more than they rule in
Heavy clay, sandy soil, loam and limy alkaline ground all behave differently, and so does a yard that stays soggy after spring rain. Filtering on soil and moisture together is one of the most useful things the finder does.
Eventual size is the mistake people make once
Most planting regrets are a spacing problem three years later. Filtering by final height and spread stops you buying a shrub that swallows the sidewalk or needs cutting back every year.
It saves money before it saves work
A plant that dies in its first winter, or gets eaten by deer in its first week, costs more than one that suited the spot. Turn on Deer resistant if deer visit your yard; matching first is cheaper than replacing later.
Local wildlife gets more than you do
Tick North American native and Bee friendly to favor plants that feed native bees, butterflies and birds, and Hide invasive plants to leave out anything flagged as invasive in parts of the US.
How to use it
Matching plants, step by step
Five steps, and the first two matter more than the other three combined.
Step 1
Know your zone and your spot
Look up your USDA hardiness zone by ZIP code. Then check the spot at three times of day for direct sun, and dig a hole: is the soil sticky, sandy or crumbly, and does water sit in it after rain? Those answers do most of the filtering.
Zone, sun, soil and moisture before anything else. Set only what you are sure about - every filter you add narrows the list, and over-filtering leaves you with three plants and no plan.
Color, foliage, bloom season and style come last, applied to a list that already suits the site. Add Deer resistant, North American native or Hide invasive plants here if they matter to you.
Read the plant profile, check toxicity if you have children or pets, and check your state’s invasive plant list for anything new to you. The finder narrows the field; the final check is always yours.
Full plant profiles →
Common questions
Choosing plants: common questions
How does the Plant Finder work?
You set the conditions you actually have - your USDA zone, sun, soil type, moisture, and the maximum height and spread the spot can take - and it shows only the plants in the database that suit all of them. You can then narrow further by plant type, foliage, flower color, bloom season, garden style, planting spot and how much care you want. Filters combine, so each one you add shortens the list.
How many plants are in the database?
There are 506 garden plants, covering trees, shrubs, perennials, vines, grasses, ferns and bulbs. Each one has a USDA hardiness zone range, deer resistance, North American native status and, where relevant, a US invasive warning. The same database drives the finder and the full PlantMapper app.
How does the USDA zone filter work?
Pick your zone and the finder shows only plants whose hardiness range includes it, so they should survive an average winter where you live. Not sure of your zone? Use our zone finder to look it up by ZIP code. Zones measure winter cold only, so also consider summer heat and humidity, especially in the South.
Can I find deer-resistant or native plants?
Yes. Under Show only, tick Deer resistant for plants deer usually leave alone, and North American native for plants native to the US and Canada. No plant is completely deer-proof - hungry deer will try almost anything.
What does “Hide invasive plants” do?
It removes plants flagged as invasive in parts of the US. Invasive lists vary by state, so a plant can be a problem in one region and harmless in another - always check your own state’s invasive plant list before planting something new to you.
Which filter should I set first?
Zone, then sun, then soil and moisture. Those decide whether a plant survives; everything else decides whether you like it. Set only the filters you are confident about - over-filtering is the usual reason people end up with a very short list.
Why did my search return no results?
Almost always because too many filters are set at once, or because a combination is genuinely rare - a tall evergreen native for deep shade in zone 3, for instance. Clear the least important filter and try again, starting with flower color or style rather than zone or sun.
Can I trust the plant data completely?
Treat it as well-researched general guidance rather than a guarantee. Plants vary by cultivar, by nursery and by the microclimate of your yard, and summer heat, humidity, wind and elevation all change what will thrive. Always check the plant tag and, where it matters, toxicity, eventual size and your state’s invasive list before you buy.
What is the difference between the finder and the app?
The finder on this page is the quick filter - set your conditions, see the matches. The full app uses the same database but adds comparison, saved lists and fuller plant profiles. Both are free and neither needs an account.
Does it tell me how far from the house to plant?
The database records root behavior and a suggested safe distance for the plants where it matters, which is most useful for trees and vigorous shrubs. It is a guide rather than a professional assessment - for anything large near a foundation, driveway or sewer line, or on expansive clay soil, get advice from a certified arborist.
Ready when you are
Start with the conditions you have
Know your zone? Go straight to the finder and set it along with your sun and soil. If not, find your zone by ZIP code first - it takes a few seconds. And if you are designing a whole yard rather than filling a gap, start with Garden Types and come back here for the plants.