Landscape Lighting · Planning

How to Plan Landscape Lighting

The yards that look best after dark are not the ones with the most fixtures. They light a walkway, the steps and two or three features worth looking at, and let everything else fall into shadow. Light the whole lot evenly and it looks like a parking lot.

General advice for American homeowners, not electrical instructions. Anything at 120 volts, such as a new outdoor outlet, a new circuit or hardwired fixtures, should be installed by a licensed electrician, usually with a permit and inspection under your local code. Part of the PlantMapper Landscape Lighting section.

Two vintage-style lamps lighting a backyard path at dusk
Light a few features well and let the rest stay dark · photograph via Pexels
Start here

Light the yard, not the darkness

Most people start by trying to light everything so they can see the whole yard. That is the wrong goal. Your eyes adjust to the brightest thing in view, so a yard lit evenly from fence to fence looks flat, while one with three or four features glowing out of the darkness can look better at night than it does at noon.

A smaller plan is also easier to live with. Fewer fixtures mean a smaller transformer, less wire to bury, less upkeep, a lower electric bill and far less light shining into the house next door. Most good residential schemes end up smaller than the homeowner first pictured.

This guide covers the decisions you make before you buy a single fixture: which parts of the yard really need light, which features earn an accent light, how to avoid glare and dark holes, and how to keep your lighting out of the neighbors' bedroom windows and the night sky.

How to design it

Three layers, in this order

Good plans split lighting into three separate jobs. The usual mistake is expecting one set of fixtures to do all three.

Path and step lighting

So people get around safely

The minimum you need to use the yard after dark: the walk from the back door to the driveway or gate, deck and porch steps, changes in grade, and wherever you set a drink down.

  • Steps and changes in grade come first. They are where people actually trip.
  • Keep it low and pointed down rather than bright and overhead.
  • Warm and dim beats bright: your eyes adjust to the dark and need far less light than you expect.
  • This layer is used every single night, so make it dependable and put it on a timer.

Ambient lighting

What makes you want to stay outside

String lights over a table, lanterns, candles, a soft wash across a wall or fence. This is the layer that gets the deck or patio used in the evening, and it is the cheapest of the three.

  • Warm light, kept low, with plenty of shadow between the bright spots.
  • Dimmable where you can manage it. A scheme you can turn down gets used far more.
  • Rechargeable and plug-in options need no wiring and are genuinely good these days.
  • Go for pools of light rather than one even wash.

Accent lighting

The three or four features worth showing off

A multi-trunk tree, a stone wall, a specimen shrub, a fountain. This layer creates the view from inside the house, which is how most people see their yard from November to March.

  • Three or four accents in a typical backyard is plenty. Six is too many.
  • Pick things with texture and shape: bark, stone, foliage, moving water.
  • Sit indoors and look out before deciding what to light. That is your real audience.
  • Evergreens and plants with strong structure earn their light all year; a shrub that drops its leaves does not.

What to leave dark

The most important layer of all

Darkness is not a hole in the plan, it is what makes the lit parts work. A yard with no dark in it has no depth.

  • Leave the middle of the lawn dark. There is nothing there to look at.
  • Leave fences and property lines dark unless something on them is worth showing.
  • Leave the compost pile, the trash cans and the shed dark unless you need to get to them.
  • A dark yard with four lit features looks bigger than a bright yard with four dark corners.

Before you buy anything, go out after dark with a strong flashlight and have someone aim it at different features from different angles while you watch from the deck and from the kitchen window. Half an hour of that tells you more than any sketch, and it is usually when people find out the tree they planned to light looks dull and the stone wall behind it looks fantastic.

Where light is really needed

Lighting each part of the yard

Each part of a yard needs a different approach. These are the five that come up in nearly every plan.

Walkways and steps

The practical core of any plan, and the one place where a mistake is a safety problem rather than just a looks problem.

  • Light the ground, not people's eyes. Use low path lights, in-ground well lights or shielded stake lights aimed down. Anything that shines at eye level wrecks your night vision and makes the rest of the yard disappear.
  • Stagger the fixtures on alternating sides instead of lining them up in pairs, which looks like an airport runway.
  • Space them so the pools of light just overlap on the ground, typically every 6 to 12 ft along a residential walkway, but judge it by eye rather than by rule.
  • Light every step and change in grade. One dark step is the most common trip hazard in any yard. Riser lights set into deck or porch steps, or a fixture washing light across the treads, work best.
  • Make the top and bottom of a flight of stairs obvious, so people can see where it begins.
  • Keep the light warm and modest. Once your eyes adjust you need far less than you think.

Patios, decks and seating areas

The space people actually sit in, and the one where mood matters more than brightness. Nothing ends an evening outside faster than a bright light in your face.

  • String lights overhead are the single most effective thing you can add. They are warm and forgiving, and they define the space without shining in anyone's eyes.
  • Wall or deck-post lights beside a door or along a railing, mounted below seated eye level and shielded so you never see the bulb.
  • Keep light off the table itself: a candle or a small rechargeable lantern is plenty. Light the edges of the space instead.
  • Light a wall, a planter or a shrub at the edge of the patio and let the reflected glow do the work.
  • A dimmer, or two separately switched groups of lights, makes a huge difference to how often a deck or patio gets used.
  • Never aim anything at the seating from in front. Light should come from behind and beside people, not at them.

Entries, doors and driveways

The part of the plan guests see first, and the part most often overdone.

  • A pair of shielded wall lanterns either side of the front door, or one to the side, is nearly always enough. Warm, modest and aimed down.
  • Light the house number and the lock, which is genuinely useful, plus the threshold and porch steps.
  • Along a driveway, use low path lights or in-ground markers rather than tall posts. Never aim a light toward the street or into oncoming drivers' eyes.
  • Put the entry lights on a photocell or an astronomical timer. They are the ones you want coming on by themselves every night.
  • If you want a bright security light, keep it separate from the welcome lighting and on a motion sensor. See security lighting.
  • Check the effect from the sidewalk and from a neighbor's window, not just from your own front door.

Ponds, fountains and water features

Water is the most rewarding thing to light in a yard. It moves, it reflects, and a little light goes a long way. It is also where the electrical rules are strictest.

  • Electrical safety comes first. Pools, spas, ponds and fountains have their own sections in the electrical code. Any 120V work near water belongs to a licensed electrician, everything must be GFCI protected, and every fixture must be listed for where it actually sits: submersible, wet location or nearby.
  • Light water from the side or from below, never from straight above, which just shows you the bottom.
  • Uplighting moving water, such as a spillway, a bubbler or a small waterfall, from within it is the most striking single accent in most yards.
  • A still pond often looks best left dark and used as a mirror, reflecting a lit tree or wall behind it.
  • Keep light out of the water in a wildlife pond, where it disturbs frogs, toads and insects. Light the plants around the edge instead.
  • Submersible fixtures need cleaning far more often than anything else in the yard, especially where algae grows fast in summer.

Fences, walls and structures

Vertical surfaces are what give a yard its shape after dark, and lighting a good one is often more effective than lighting any plant.

  • Grazing a textured surface such as brick, fieldstone or stucco with a light close to its base, aimed steeply up, shows off the texture. On a smooth wall it shows every flaw instead.
  • A pergola or arbor lit from below reads as structure and frames the yard. See the Pergolas section.
  • Avoid lighting a fence straight on. It flattens it and usually shines right into the yard next door.
  • A lit wall or feature at the far end of the yard draws the eye through the space and makes it feel deeper.
  • Keep light off shared fences and property lines. Shielded fixtures and steep angles solve it.
The layer that does the most work

Accent lighting for trees, plants and features

Three or four well-chosen accents transform a yard at night. Six make it look busy, and a dozen make it look like a holiday display.

✓Worth lighting

  • Multi-trunk trees and interesting bark: river birch, Japanese maple, serviceberry, crape myrtle in warm zones. The best accent subjects there are.
  • Evergreens with strong shape that hold up all winter: arborvitae, holly, pines, junipers, yucca and agave in dry regions.
  • Ornamental grasses, which glow when lit from behind: little bluestem, switchgrass, feather reed grass, miscanthus where it is not invasive.
  • Textured walls and stonework, grazed from close to the base.
  • Moving water, lit from within or from the side.
  • One specimen at the far end of the yard, which draws the eye through the space.

!Rarely worth lighting

  • An open lawn. There is nothing there to see, and lighting it makes the yard look smaller.
  • Shrubs with no winter structure, which disappear for half the year.
  • Low annuals and bedding color, which read as nothing at night.
  • Fences lit straight on, which flattens them and lights the neighbors instead.
  • A still pond lit from above. You see the bottom instead of the reflection.
  • Everything at once. Accent lighting only works if most of the yard stays dark.
How to aim it

The techniques worth knowing

Nearly every landscape lighting effect is one of these. Knowing the names makes it much easier to explain to an installer, or to yourself, what you are after.

Landscape lighting techniques and what each one is for.
TechniqueHow it worksBest for
UplightingA fixture at ground level aimed up into the subjectTrees, structural plants, pergola posts. The workhorse of landscape lighting
Downlighting / moonlightingA fixture mounted high in a tree aimed down through the branchesThe most natural look there is; dappled light on a walkway, deck or patio
GrazingA light close to a surface, aimed steeply along itTextured walls, stonework, bark. Shows texture; unkind to smooth surfaces
WashingA wide beam from farther back, giving even lightA whole wall, a hedge, a backdrop. Softer and less dramatic than grazing
SilhouettingLight the surface behind the subject and leave the subject itself darkBold shapes: a sculpture, a specimen shrub, a gate
Backlighting / shadowingA light behind and below a plant, throwing its shadow onto a wall or fenceGrasses and ferns; the shadow is often more striking than the plant
Cross-lightingTwo lower-output fixtures from opposite sides instead of one bright oneLarger trees and specimens. Softer, more three-dimensional, less glare
Path and step lightingLow, shielded, downward-facing fixtures along a routeSafety and getting around. Keep it dim and below eye level

For a tree, two low-output fixtures cross-lighting it from opposite sides nearly always beat one bright spotlight aimed straight up. A single fixture gives a hard, flat, stage-like look and plenty of glare; two give depth, and each one can stay at a lower setting.

Making it comfortable

Avoiding glare and dark spots

Glare is the most common flaw in residential landscape lighting, and it almost always comes from being able to see the bulb itself, not from the fixture being too bright.

  1. Hide the source, show the effect

    If you can see the bright point of a bulb from where you sit, walk or look out a window, the fixture is in the wrong place or poorly shielded, however good the light it gives.

    Choose fixtures with a recessed bulb, a hood or cowl, a glare guard or a louver, and tuck them behind plants, under a step nosing or below a wall cap wherever you can.

  2. Aim away from the viewpoints that matter

    Work out where people actually look from: the deck, the back door, the kitchen window, the walk to the driveway, and the neighbors' windows. Aim fixtures so none of those views looks straight into a bulb.

    Uplights set just behind a plant and aimed away from the house are far more comfortable than the same fixture placed in front of it.

  3. Use lower output and more fixtures, not the reverse

    Two or three modest fixtures nearly always look better than one powerful one, cause less glare and give a more three-dimensional result.

    Most residential landscape fixtures are much brighter than they need to be. If a fixture has adjustable lumens or you can choose the bulb, start lower than you think.

  4. Avoid a hard edge between light and dark

    A dark spot is only a problem when it sits right next to a bright one, because your eyes cannot adjust to both at once. Gradual transitions read as depth; sudden ones read as a black hole.

    Overlap the pools of light slightly along a route, and keep the brightest fixture away from the darkest stretch of a walkway.

  5. Preserve night vision

    Your eyes take around twenty minutes to adjust fully to darkness, and one bright light resets that instantly. That is exactly why a dim scheme is more usable than a bright one.

    Keep any security floodlight on a motion sensor and separate from the landscape lighting, so it is not blazing while you sit outside.

  6. Test it after dark before you bury anything

    Lay the fixtures out temporarily (12V stake lights are ideal for this) and live with them for an evening or two before trenching cable or setting anything permanently.

    Check every view, including from inside and from upstairs windows, and check what the neighbors can see.

Keeping it in proportion

Security lighting without lighting up the whole street

A bright LED floodlight blazing all night is the classic home security setup, and it is worse than useless: it ruins night vision, creates deep shadows to hide in, annoys the neighbors and adds to sky glow.

✓What works

  • Modest output on a motion sensor, so light appears when something moves. That is what actually deters and what actually alerts you.
  • Sensors aimed at approach routes and doors, not at the whole yard, the sidewalk or the street.
  • Warm-white light: more comfortable, less intrusive at night and plenty bright enough.
  • Good low-level lighting at doors and gates on a photocell, so entries are never pitch black.
  • Shielded, fully cut-off fixtures aimed down, so the light lands where you want it and nowhere else.
  • A short on-time. One or two minutes is plenty, so it switches off again.

!What does not

  • A floodlight left on all night, which people stop noticing within a week.
  • Very high output, which creates black shadows right outside the beam.
  • Cool white or blue-white light, which is harsh, intrusive and looks commercial.
  • Sensors set off by cats, raccoons, deer, passing cars and swaying branches. A light that cries wolf gets ignored or unplugged.
  • Anything aimed at a neighbor’s window or at the street.
  • Treating security lighting as part of the landscape scheme. Keep them separate and separately controlled.

Badly aimed security lights are a common cause of neighbor disputes, and some towns, counties and HOAs have outdoor lighting rules about glare and light trespass, so check yours. Aim it, shield it and set the timer properly: a modest motion light that comes on for ninety seconds works better and causes far less trouble than a floodlight that never goes off.

Being a good neighbor

Light pollution, neighbors and wildlife

Light from homes and yards adds to the sky glow that hides the stars over most of the country, and it affects both the people and the animals next door. Nearly all of it is avoidable with the same steps that make a scheme look better anyway.

Neighbors

Aim, shield, time, dim

The four things that stop a scheme becoming a nuisance are the same four that make it look good. Light spilling into a bedroom window is the most common complaint.

  • Aim down and in, never at a property line or a window.
  • Use shielded fixtures so the bulb cannot be seen from outside your yard.
  • Put everything on a timer or photocell so nothing burns all night.
  • Go and stand on the sidewalk, and ask your neighbor to tell you honestly what they see.

Wildlife

Darkness is habitat

Artificial light at night affects moths and other night-flying insects, fireflies, bats, frogs and migrating birds, many of which travel at night in spring and fall. In a yard managed for wildlife it is worth taking seriously.

  • Keep light out of a wildlife pond entirely. Light the plants around it instead.
  • Leave hedges, brush piles, unmown areas and back fence lines dark; those are wildlife corridors.
  • Warmer color temperatures and lower output disturb insects and bats less than cold, bright light.
  • Use motion sensors and timers so the yard is genuinely dark for most of the night.

Color and output

Warm and low

Two specs do most of the work: how warm the light is, and how much of it there is. Both are easy to get wrong at the store.

  • Choose warm white, around 2200 to 2700K, for nearly all landscape lighting, in line with dark-sky guidance.
  • Cool and blue-white light scatters more, disturbs wildlife more and looks harsh outside.
  • Choose the lowest lumen output that does the job, and dim where you can.
  • See lumens and color temperature.

When it is on

The easiest win

A scheme that is dark for most of the night causes a fraction of the disturbance and costs a fraction as much to run, with no loss of enjoyment.

  • Timers on everything decorative. Off by 10 or 11pm suits most households.
  • Photocells or astronomical timers so nothing runs in daylight.
  • Motion sensors on path and security lighting where it makes sense.
  • Separate zones so the ambient lighting and the path lighting are not tied together.
Budgeting

What landscape lighting costs

Very rough US price ranges. Prices vary a lot by region and brand, and the spread is wide because a box of solar stake lights and a professionally installed system are not the same product in any sense.

Rough landscape lighting costs.
ItemTypical costNotes
Solar stake or path light$5 to $40 eachNo wiring; brightness and lifespan vary enormously with quality
Solar string lights$20 to $60Good for a season or two
Plug-in string lights, outdoor rated$30 to $150Plugs into an existing GFCI outdoor outlet
12V low-voltage starter kit (transformer + 6 to 8 lights)$150 to $500The usual DIY route; plugs into a GFCI outdoor outlet
Extra low-voltage fixture$25 to $120 eachQuality varies hugely; cheap aluminum stakes often fail in two or three winters
Quality brass or copper path light or spotlight$60 to $250 eachSolid brass, copper or stainless will still be working in fifteen years
120V wall lantern, wet-location listed$40 to $250 eachPlus a licensed electrician to install it
In-ground well light or step light$50 to $250 eachPlus the work to set it into the ground, deck or masonry
New GFCI outdoor outlet with in-use cover, by an electrician$200 to $500Often the single most useful thing to have done
New 120V outdoor lighting circuit, installed$800 to $3,000 or more depending on scopeLicensed electrician, permit, trenching, fixtures and inspection
Professionally designed and installed low-voltage system$2,500 to $10,000 or moreDesign, transformer, quality fixtures and installation

The best-value spend in most yards is a GFCI-protected outdoor outlet with a weatherproof in-use cover, installed by a licensed electrician, plus a good 12V low-voltage kit plugged into it. That combination gives you a real, safe, expandable system for a few hundred dollars, and the outlet is handy for a dozen other things too.

Avoid these

Six planning mistakes

All six are settled before anything is bought, and all six are what make a lighting scheme look amateur.

1. Lighting everything

An evenly lit yard is a flat yard. Contrast is what makes lighting look good, and a scheme with no darkness has no depth. It also costs more, uses more power and bothers more people.

The fixPick three or four things worth lighting and leave the rest dark. Nearly every good scheme is smaller than the homeowner first imagined.

2. Glare you can see from the deck

If you can see the bulb itself from where you sit, walk or look out, the scheme is uncomfortable however good the fixtures are, and it ruins the night vision that lets you see the rest of the yard.

The fixUse shielded fixtures with recessed bulbs, hoods or louvers, tuck them behind plants or under a step nosing, and aim them away from every view that matters.

3. Lining path lights up like a runway

A row of identical path lights at even spacing down both sides of a walk is the most recognizable amateur look there is, and it does not even light the walk well.

The fixStagger fixtures on alternating sides, keep them low and pointed down, and overlap the pools of light on the ground rather than lining up the fixtures.

4. Cool white light

Blue-white light looks harsh outdoors, turns plants gray, scatters more into the sky and disturbs insects and bats more than warm light. It looks like a parking lot.

The fixBuy warm white, around 2200 to 2700K, for essentially all landscape lighting, and keep the color temperature the same across the whole yard.

5. Forgetting the view from inside

Most people see their yard far more often through a window than from a chair in it, especially through the long winter evenings, and a plan made only from outside usually shows a row of bright dots and nothing else.

The fixPlan the accent layer from the kitchen and family-room windows. Sit inside while someone outside holds a flashlight, and decide what is worth lighting.

6. Buying fixtures before testing the effect

People buy a box of eight spotlights, install them, and then find the tree looks better lit from the other side and the stone wall was the interesting feature all along.

The fixTest with a flashlight on a dark evening, then lay 12V fixtures out temporarily and live with them for a night or two before burying cable or ordering more.

Print it or check it off as you go

The planning checklist

Thirteen things to settle before you buy anything. Your checks are saved in this browser only.

The scheme

Comfort and aim

Neighbors and running it

Questions

Planning landscape lighting: your questions answered

Answers to the questions homeowners ask most.

How do I plan a landscape lighting scheme?

Think in three layers. First, path and step lighting so people get around safely, kept low, warm and aimed down. Second, ambient lighting where you sit, usually string lights overhead and shielded wall or deck lights below eye level. Third, accent lighting on three or four features really worth showing, planned from the window you look out of most. Then leave the rest dark, because the darkness is what makes the lit parts work.

How many landscape lights do I need?

Far fewer than most people install. A typical backyard looks great with lighting along the walk to the driveway or gate, something over the deck or patio, and three or four accents. Six or more accents in an ordinary yard starts to look busy, and a yard lit evenly all over looks flat. Fewer fixtures also mean a smaller transformer, less wire, less upkeep and much less nuisance to neighbors and wildlife.

How far apart should path lights be?

Light the ground, not people's eyes. Use low path lights, in-ground lights or shielded stake lights aimed down, staggered on alternating sides rather than lined up in pairs, and spaced so the pools of light just overlap on the ground, usually every 6 to 12 ft on a residential walkway, though you should judge it by eye. Light every step and change in grade, because a single dark step is the most common trip hazard in a yard. Keep it warm and dim; your eyes adjust and need far less than you expect.

What is the best way to light a tree?

Two lower-output fixtures cross-lighting it from opposite sides, rather than one bright spotlight aimed straight up. A single fixture gives a hard, flat, stage-like look and plenty of glare; two give depth and let each one run at a lower setting. Pick trees with something to show, such as multiple trunks, good bark or a strong evergreen shape, and set the fixtures just behind the tree, aimed away from the house and the deck so nobody looks into them.

How do I keep landscape lighting from bothering my neighbors?

Aim, shield, time and dim, the same four things that make a scheme look better. Aim down and in, never at a property line or a window. Use shielded fixtures so the bulb is not visible from outside your yard. Put everything on a timer or photocell so nothing burns all night. Keep output low and color warm. Some towns and HOAs have rules on outdoor lighting and light trespass, so check yours, then stand on the sidewalk and ask your neighbor honestly what they can see.

What color temperature should landscape lights be?

Warm white, around 2200 to 2700K, for essentially all landscape lighting. It is more comfortable, makes foliage, brick and stone look right, puts less blue light into the night sky, which is what dark-sky groups recommend, and disturbs insects and bats less than cool light. Cool white and daylight bulbs look harsh and commercial outdoors and turn plants gray. Keep the color temperature the same across the whole yard, because mixing warm and cool fixtures is obvious after dark.

Are motion-sensor security lights a good idea?

Modest, motion-activated security lighting is genuinely useful. A floodlight left on all night is not: people stop noticing it within a week, high output creates black shadows just outside the beam for someone to stand in, and it annoys everyone nearby. Aim a warm-white fixture of moderate output at the actual approach, shield it so the light lands where you want it, set a short on-time of a minute or two, and keep it on a separate control from the landscape lights so it is not tripping while you sit outside.

How much does landscape lighting cost?

Very roughly, and it varies a lot by region: solar stake lights are $5 to $40 each and outdoor string lights $30 to $150. A 12V starter kit with a transformer and six to eight fixtures runs about $150 to $500, with good brass or copper fixtures at $60 to $250 each. A licensed electrician adding a GFCI outdoor outlet often charges $200 to $500, and a professionally designed and installed low-voltage system commonly runs into the thousands. For most yards the best value is a GFCI outdoor outlet plus a good 12V kit plugged into it.

Where to go from here

The next steps