Calculators

Patio Paver Calculator

Work out your patio’s square footage, how many pavers to buy and how much gravel base and sand goes underneath.

How many pavers do I need?

Enter the patio size in feet, the paver size in inches and the depth of gravel base, then press Calculate.

Results are estimates for planning, and any prices are rough US ranges. Bag sizes, material weights and prices vary by supplier and region - confirm the final quantity before you order.

Good to know

Building a patio that lasts

Get the base right and a paver patio stays flat through freeze-thaw winters and summer storms.

A firm base

Lay pavers on 4-6 in of compacted crushed stone (more in cold climates) with a 1 in screeded layer of coarse sand on top.

Allow for waste

Order about 10% extra for cuts at the edges, curves and the odd broken paver; 15% for herringbone or diagonal patterns.

Slope for drainage

Build in a fall of about ⅛-¼ in per foot away from the house so rain runs off instead of pooling against the foundation.

Handy for a patio project

Our picks

As an Amazon Associate, PlantMapper may earn from qualifying purchases. Prices and availability are set by Amazon.

← All garden calculators

Common questions

How many 16 × 16 pavers do I need per square foot?

Each 16 × 16 inch paver covers about 1.78 square feet, so you need about 0.56 pavers per square foot. A 12 × 10 ft patio (120 sq ft) takes about 68 pavers before waste, or 75 with 10% extra for cuts. A 12 × 12 inch paver covers exactly 1 square foot; a 24 × 24 covers 4.

How much gravel base do I need under pavers?

For a walkway or patio, 4-6 inches of compacted crushed stone (often sold as paver base or ¾-inch crusher run) is typical, and 6-8 inches or more in cold climates or under a driveway. Order about 25% more than the finished volume, because it compacts. A 4-inch base under 120 square feet works out to about 1.9 cubic yards.

Do I need a permit for a patio?

Ground-level paver patios usually don’t need a building permit in most US towns, but rules vary, and some localities limit impervious surface or require permits for drainage changes. Homeowners associations often have their own approval process. Call 811 before you dig to have underground utility lines marked - it’s free.

Should pavers be laid on sand or concrete?

Most DIY paver patios use a flexible system: compacted gravel base, a 1-inch layer of coarse concrete sand, the pavers, then polymeric sand swept into the joints. It drains well and copes with freeze-thaw movement. A mortared installation over a concrete slab suits flagstone and some formal designs, but it is harder to do well and can crack where the ground heaves.

More in Calculators

See everything in Calculators →